The difference between steel rolls and steel bands
Release time:
2024-02-17
Steel rolls and steel bands: In processing processes, cutting, curvature, curvature and other methods are often used, but the specific process technology and methods are different to meet different processing needs.
The steel rolls and steel bands are significantly different in terms of definition, use, production method, size and processing technology.
Definition and use
Steel roll: Steel roll, also known as rolling steel, is a curly steel material by hot or cold pressure. It is mainly used to manufacture various steel products such as refrigerators, air conditioners,
automobiles, and buildings. Orsen
Steel belt: Steel belt refers to the width of less than 1300mm, and the length is slightly narrow and long according to the size of each volume. It is usually used to make spring, sealing parts,
stretching, clamping parts, etc., which are called elastic elements. Orsen
Production method
Steel rolls: The production method is generally divided into two types: cold rolling and hot rolling. Cold -rolled steel rolls have good surface quality, high size accuracy, but low strength; hot -
rolled steel roll strength, but the surface flatness is poor. Orsen
Steel belt: The production method includes three types: cold rolling, hot rolling and galvanized treatment. Cold -rolled tapes have good surface quality, high size accuracy, and high strength;
hot -rolled steel belt strength is large, but the hardness is low; galvanized steel strap enhances the performance of anticorrosion, antioxidant, and corrosion resistance.
Processing
Steel rolls and steel bands: In processing processes, cutting, curvature, curvature and other methods are often used, but the specific process technology and methods are different to meet
different processing needs.
Latest News
Which is durable for stainless steel plates and aluminum alloy plates
Therefore, the selection of stainless steel plates or aluminum alloy plates should be comprehensively evaluated according to the specific application scenarios, needs and environmental conditions. If the cost factors are not considered, stainless steel is usually considered a more durable choice. Orsen
2024-12-17
The difference between carbon steel rod and stainless steel rod
Stainless steel rod: Due to its excellent corrosion resistance and aesthetics, the application fields of stainless steel rods are more widely used, including construction, decoration, chemical, food processing, medical equipment, aerospace and other industries.
2024-06-21
The difference between steel rolls and steel bands
Steel rolls and steel bands: In processing processes, cutting, curvature, curvature and other methods are often used, but the specific process technology and methods are different to meet different processing needs.
2024-02-17
The reasons why reinforced and concrete can work together
The surface of the cement slurry on the surface of the reinforced and the growth of the cement crystal; the resistance power is due to the compression of the steel bars during concrete; the mechanical bite force effect.
2023-11-15
Where is the difference between steel rods and steel bars
Different mechanical properties: Due to different uses, the mechanical properties of reinforced and steel rods will be different. The tensile strength, yield strength and extension rate of reinforced
2023-05-17
The difference between work steel and H -shaped steel
Workers have performed well in undergoing direct pressure and pull -up, but due to their section size limit, the twist resistance is poor. The H -shaped steel has better carrying capacity and bending performance due to its section shape and design characteristics, while also performing well in terms of seismic performance.
2023-02-10
Questions?
We are here to help.
Copyright ©
